Name: Stainless Steel Mirror Panel
SKU: 0







HOME>PRODUCTS>Stainless Steel>Stainless Steel Plate

Stainless Steel Mirror Panel



+86 13181065126



8613181065126



+86 13181065126



zxgroup01@zhongxiangsteel.com

PRODUCT DESCRIPTION

The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. It is an alloy steel that is not easy to rust, but it is not absolutely rust-free. Stainless steel plates refer to steel plates resistant to corrosion by weak media such as atmosphere, steam and water, while acid-resistant steel plates refer to steel plates resistant to corrosion by chemically corrosive media such as acids, alkalis, and salts.

NameStainless steel plate/sheet

Grade310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L,302, 301, 201, 202, 403, 405, 409, 409L, 410,

410S, 420, 430, 631, 904L, Duplex, 2205，2507，etc.

StandardJIS, AISI, ASTM, DIN, TUV,BV,SUS,EN,etc

Thickness 0.1-300mm thickness

Surface2B, 2D, BA, NO. 1, NO. 4, NO. 8, 8K, mirror,checkered,embossed,hair line, sand blast, Brush, etching, etc

TechniqueHot Rolled And Cold Rolled

Width3-600mm -1500mm

Length3-2000/2438/3048mm

Size1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

ColorGolden, Black , Sapphire Blue, Brown, Rose gold, Bronze, Purple, gray, silver, Champagne, violet, blue diamond, etc

ApplicationInterior/exterior/architectural/bathroom decoration, elevator

Surface	Characteristic	Summary of Manufacturing Method	Application
NO.1	Silvery white	Hot rolled to specified thickness	Do not need to have a glossy surface use
lackluster
NO.2D	Silvery white	After cold rolling, heat treatment and pickling are carried out	General material, deep material
NO.2B	Gloss is stronger than No.2D	After No.2D treatment, the final light cold rolling is carried out through the polishing roller	The general material
BA	As bright as a sixpence	No standard, but usually a bright annealed surface with high reflectivity.	Building materials, kitchen utensils
NO.3	Rough lapping	Grind with 100~200# (unit) strop tape	Building materials, kitchen utensils
NO.4	Intermediate grinding	Polished surface obtained by grindingwith 150~180# strop abrasive tape	Building materials, kitchen utensils
NO.240	Fine lapping	Grinding with 240# strop abrasive tape	kitchenware
NO.320	Very fine grinding	Grinding was carried out with 320# strop abrasive tape	kitchenware
NO.400	The luster is close to BA	Use 400# polishing wheel to grind	General timber, building timber, kitchen appliances
HL	Hairline grinding	Suitable particle material for hair stripe grinding (150~240#) with many grains	Building, construction material
NO.7	It's close to mirror grinding	Use a 600# rotary polishing wheel to grind	For art or decoration

Corrosion resistance

High temperature oxidation resistance

Thermal stability

Machinability

According to the production method of hot rolling and cold rolling of two, including 0.5.10-885 mm thickness of 72938 thin cold plate and 4.5-100 mm thick plate.

Requirements can withstand oxalic acid, sulfuric acid-ferric sulfate, nitric acid, nitric acid-hydrofluoric acid, sulfuric acid-copper sulfate, phosphoric acid, formic acid, acetic acid and other acids corrosion, widely used in chemical industry, food, medicine, paper making, petroleum, atomic energy and other industries, as well as construction, kitchenware, tableware, vehicles, household appliances and various parts.

MESSAGE

{{title}}